Some requirements for installation of heat shrinkable cable accessories

 

1. Heat shrinkable cable accessories installed using the ambient temperature should be above 0 ℃, relative humidity below 70%. Because in the heating of its temperature is rising, but the cable insulation surface is still at a lower temperature, high temperature and humidity of the cold surface of the surface of the material will be in its condensation, which will have a moisture-covered insulation surface covered in the inside, Seriously affecting the installation of thermal cable terminal head quality.

 

2. The installation of the heat-shrinkable cable accessories must be completed continuously. Because the completion of the continuous will make the heat shrink cable attached to the tide, affecting the quality of their products, resulting in frequent failures.

 

3. The installation site should be adequate light, before installation should check whether the tools are complete, is familiar with the use of various tools, in strict accordance with the instructions to install.

 

4. When installing the heat-shrinkable cable accessories, it is strictly forbidden to damage the sheath and insulation of the cable. In the place where the cable accessories and metal parts are in contact, they should be polished smoothly. If they are not polished, there may be barbs or other parts on the metal parts. Putting up will cause cracking of the heat shrink attachments.

 

Let's talk about it today. Suzhou flying Bo specializing in the production of thermal cable accessories, cold shrink cable accessories, heat shrink tubing and other peripheral parts. Integrity, strength and quality of products recognized by the industry, welcome friends from all walks of life come to visit, guidance and business negotiations!